|
|
 |
|
Blinds, Roll Up,and Roman Shades Measurement Work Sheet
Panels and Draperies Measurement Work Sheet
Blinds, Roll Up,and Roman Shades Measurement Work Sheet
- When measuring, it's best to use a metal tape measure, since the fabric tape measure may stretch. Measure each window separately as widths may vary slightly.
- Print out this convenient measurement work sheet and follow these four easy steps to ensure a custom fit for blinds or shades.
- After completing this work sheet, return to Spiegel.com and complete you order online.
Step 1: Provide Measurements
Width:____________inches to the nearest 1/8"
Length:___________inches to the nearest 1/8"
Not all products available in all sizes. Please check the specific product size availability.
Step 2: Select Type of Mount
Decide whether shade should be mounted inside or outside the window frame and follow the measuring instructions below.
Inside Mount: Shade or blind will be mounted (recessed) inside the window frame.
Use a metal tape measure.
(A fabric tape measure may stretch.)
Measure each window separately.
(Sizes may vary slightly.) |
- Measure the width (A) of the opening. Because not all windows are exactly "square", measure the width in three places: high, middle and low. record the shortest width.
- Measure the length (B) of the opening.
|
Outside Mount: Shade or blind will be mounted on the outside of the window frame.
Use a metal tape measure.
(A fabric tape measure may stretch.)
Measure each window separately.
(Sizes may vary slightly.)
|
- Measure the width (A) of the area to be covered; include window trim when applicable
• The recommended overlap is at least 1 1/2" on each side.
- Measure the length (B) of the opening.
• Be sure to measure from the top of the opening/trim to the sill, bottom of the apron or the floor/carpet surface. Add 3" for bracket installation above the opening/trim.
• For floor-length or sill-length blinds, subtract 3/8" for clearance.
• For apron-length, add 1/2" for overlap.
|
Panels and Draperies Measurement Work Sheet
When measuring, it's best to use a metal tape measure, since a fabric tape measure may stretch.
Print out this convenient measurement work sheet and follow these easy steps to ensure a proper fit for your curtain then return to Spiegel.com and complete your order online.
Provide Measurements
Width:____________inches to the nearest 1/8". Measure the area to be covered.
To create a full look order a total fabric width that is equal to or greater than 2 1/2 times the window width.
Provide Length Measurements
|
- Length________inches to the nearest 1/2"
- Measure from approximately 4" above the window opening to the windowsill (B), apron (C), or the floor (D). Allow 1/2" for floor or windowsill clearance.
|
|
|
